You can relatively easily reuse your waste water by using a compact waste water treatment system. The process is as follows.
After preliminary filtration of, for example, product residue, the waste water, which may have flocculants added to it from the flocculant dosing system, enters the lamella separator. The flocculant makes the solid particles settle more quickly in the lamella separa...
After preliminary filtration of, for example, product residue, the waste water, which may have flocculants added to it from the flocculant dosing system, enters the clarifier. As a result of the polymer, the solid particles bind together to form flakes that settle in the conical funnel and pack together in the bottom. The middle of the clarifier holds a cylinder, which is open at the top and bo...
A DAF unit is characterized by the micro-air bubbles that are used to remove solids from water by means of flotation. The way the air bubbles are created and the distribution of the water and the air play an important role in this. The flotate is then removed by means of a scraper/skimmer system.
DAF is ideal for treating waste flows from, for example, abattoirs. By adding the correct flo...
The SAF is ideal for removing organic contamination from water. An SAF can consist of a number of different compartments, depending on the nature and the extent of the contamination. The compartments contain a plastic material that carries bacteria. The bacteria eat the contamination that is found in the process water.
Depending on the contamination, those elements are chosen based on the...
The roller belt press has been designed for systems that process either small or large volumes of waste water. The belt press processes waste water to create a concrete end product. The machines vary in width (0.5-3 m), but the general design remains the same. Each machine has a stainless steel frame with collection reservoirs for the extracted water.
The plate press is a batch process, which can produce a substance with a very high dry matter concentration. During every batch, mud is pumped into the plate press from, for example, a mud buffer to fill the chambers in the plate press. The water is pressed through the filter cloth by the hydraulic pressure that is applied to the plates. The plates then slide way from each other and the dry blo...
Polymer production system
Polymer can be added to make solid substances in the process water bind more quickly and, therefore, also settle more quickly. A polymer powder production system uses polymer powder. The polymer powder production system has a two-chamber or a three-chamber system. The powder is added to the water and mixed in the first chamber. Maturing occurs in the second and ...
A centrifuge or decanter is a system that continuously and mechanically separates liquid and solids by means of a centrifugal force. As a result of the large centrifugal force, the various substances are separated based on the difference in their densities.
With a centrifuge, a drum rotates around a horizontal axis. In this case, the horizontal axis consists of a screw. The screw in the d...
The Auto Sampler can be used to automate and optimize the addition of polymer. It prevents overdosing, which saves money. The number of samples that the machine takes to optimize the addition of flocculant is adjustable. It continuously monitors the amount of contamination and the settlement speed of the solids in the water to be treated and adjusts the required amount of polymer based on this....
Some proven methods of disinfection are:
– Radiation – Ultraviolet light (UV)
– Chlorine dioxide